Occupational Health and Safety Risk Management in Toll Road Construction
Article Sidebar
Main Article Content
Abstract
Construction projects carry substantial risk of work accidents. This study aims to (1) identify hazards in project activities, (2) assess and rank the associated risks, and (3) determine appropriate risk controls, using Hazard Identification, Risk Assessment, and Determining Control (HIRADC) combined with Job Safety Analysis (JSA), with Toll Road X as the case study. Of the hazards identified, none were classified as large risk; 10 were classified as medium risk and 12 as small risk. The six highest-risk findings, all medium risk, were: tripping, slipping, and falling during measurement/survey; dust exposure causing eye irritation during soil filling; slipping/falling from height during excavation; being struck by iron/steel bars; cuts from using a Bar Bender; and stepping on debris or metal during spreading. These risks may result in lost working days, permanent or partial disability, moderate environmental damage, material losses, and medical costs. Recommended risk controls include occupational health and safety (OHS) training, safety audits, use of personal protective equipment (PPE), implementation of JSA, and adoption of appropriate construction methods to reduce work accident risk.
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
M. A. Qureshi and S. Shakeel, "Risk assessment and HAZOP study of oil and gas sector," American Journal of Environment, Energy and Power Research, vol. 1, no. 7, 2013.
P. Szymaski, "Risk management in construction projects," Procedia Engineering, vol. 208, pp. 174182, 2017, doi: 10.1016/j.proeng.2017.11.036.
M. Abazid and H. Harb, "An overview of risk management in the construction projects," Academic Research International, vol. 9, 2018.
Kementerian Pekerjaan Umum dan Perumahan Rakyat (PUPR), Peraturan Menteri PUPR No. 10 Tahun 2021 tentang Pedoman Sistem Manajemen Keselamatan Konstruksi, Republik Indonesia, 2021.
S. Eizenberg, M. Shacham, and N. Brauner, "Combining HAZOP with dynamic simulationApplications for safety education," Journal of Loss Prevention in the Process Industries, vol. 19, no. 6, pp. 754761, 2006, doi: 10.1016/j.jlp.2006.07.002.
A. F. Damayanti and N. A. Mahbubah, "Implementasi metode hazard identification risk assessment dan risk control guna peningkatan keselamatan dan kesehatan karyawan di PT ABC," Jurnal Serambi Engineering, vol. 6, no. 2, 2021, doi: 10.32672/jse.v6i2.2865.
A. M. Mayadilanuari, "Penggunaan HIRARC dalam identifikasi bahaya dan penilaian risiko pada pekerjaan bongkar muat," HIGEIA (Journal of Public Health Research and Development), vol. 4, no. 2, pp. 245255, 2020, doi: 10.15294/higeia.v4i2.30908.
R. N. Putri and M. Trifiananto, "Analisa hazard identification risk assessment and risk control (HIRARC) pada perguruan tinggi yang berlokasi di pabrik," presented at [nama seminar/konferensi tidak tercantum pada sumber asli], Surakarta, Indonesia, 2019.
A. M. S. Budiono, Bunga Rampai Hiperkes dan KK: Higiene Perusahaan, Ergonomi, Kesehatan Kerja, dan Keselamatan Kerja. Semarang, Indonesia: Badan Penerbit Universitas Diponegoro, 2005.
A. A. Cholil, S. Santoso, T. R. Syahrial, E. C. Sinulingga, and R. H. Nasution, "Penerapan metode HIRADC sebagai upaya pencegahan risiko kecelakaan kerja pada divisi operasi pembangkit listrik tenaga gas uap," [nama jurnal tidak tercantum pada sumber asli], vol. 20, no. 2, 2020.
T. Ihsan, A. Safitri, and D. P. Dharossa, "Analisis risiko potensi bahaya dan pengendaliannya dengan metode HIRADC pada PT. IGASAR Kota Padang Sumatera Barat," Jurnal Serambi Engineering, vol. 5, no. 2, 2020, doi: 10.32672/jse.v5i2.1957.
A. S. Putri, "Analisis risiko bahaya pada proses penambangan batu bara menggunakan metode Hazard Identification, Risk Assessment, and Determine Control (HIRADC), Job Safety Analysis (JSA), dan Hazard and Operability Study (HAZOP) guna meminimalkan kecelakaan kerja (Studi kasus: PT. Indominco Mandiri Bontang)," Thesis, Universitas Islam Indonesia, Yogyakarta, Indonesia, 2022.
R. H. A. Tanisri and D. Siregar, "Pengendalian bahaya dan risiko K3 menggunakan metode HIRADC dan FTA pada industri kerupuk," [nama jurnal/prosiding tidak tercantum pada sumber asli], 2022.
OHSAS 18001:2007, Occupational Health and Safety Management Systems Requirements, 2007.
M. A. Friend and J. P. Kohn, Fundamentals of Occupational Safety and Health, 4th ed. Lanham, MD, USA: Government Institutes, 2007.
Standards Australia, Risk Management, AS/NZS 4360:1999. Strathfield, NSW, Australia: Standards Association of Australia, 1999.
OHSAS 18002:2008, Occupational Health and Safety Management Systems Guidelines for the Implementation of OHSAS 18001:2007, 2008.
Republik Indonesia, Undang-Undang Republik Indonesia Nomor 1 Tahun 1970 tentang Keselamatan Kerja, 1970.
T. A. Bria, W. T. Chen, M. Muhammad, and M. B. Rantelembang, "Analysis of fatal construction accidents in IndonesiaA case study," Buildings, vol. 14, no. 4, p. 1010, 2024, doi: 10.3390/buildings14041010.
M. Gangolells, M. Casals, N. Forcada, X. Roca, and A. Fuertes, "Mitigating construction safety risks using prevention through design," Journal of Safety Research, vol. 41, no. 2, pp. 107122, 2010, doi: 10.1016/j.jsr.2009.10.007.
A. J. Al-Bayati, A. T. Rener, M. P. Listello, and M. Mohamed, "PPE non-compliance among construction workers: An assessment of contributing factors utilizing fuzzy theory," Journal of Safety Research, vol. 85, pp. 242253, 2023, doi: 10.1016/j.jsr.2023.02.008.
R. Sehsah, A.-H. El-Gilany, and A. M. Ibrahim, "Personal protective equipment (PPE) use and its relation to accidents among construction workers," La Medicina del Lavoro, vol. 111, no. 4, pp. 285295, 2020, doi: 10.23749/mdl.v111i4.9398.
P. Bd and P. Strzakowski, "Analysis of the effectiveness of safety training methods," Sustainability, vol. 16, no. 7, p. 2732, 2024, doi: 10.3390/su16072732.
H. H. Griegel, K. P. Gould, and K. A. Holte, "JSA as a tool for decentralised risk handling in construction projects," Construction Management and Economics, vol. 43, no. 12, pp. 983998, 2025, doi: 10.1080/01446193.2025.2546532.
M. Gunduz and B. K. Khader, "Construction project safety performance management using analytic network process (ANP) as a multicriteria decision-making (MCDM) tool," Computational Intelligence and Neuroscience, vol. 2020, Art. no. 2610306, 2020, doi: 10.1155/2020/2610306.
M. Agustin and L. Honesti, "The effect of construction safety management system (SMKK) implementation on worker safety behaviour," Jurnal Applied Science in Civil Engineering, vol. 6, no. 3, pp. 411416, 2025, doi: 10.24036/asce.v6i3.135483.