Studi Analisis Struktur Batuan dan Evaluasi RQD: Potensi Longsoran di Ruas Jalan Goa Jepang, Jelapan, Bantul

Jadesta, “Desa Wisata Seloharjo,” Jejaring Desa Wisata, 2024. https://jadesta.kemenparekraf.go.id/desa/seloharjosurocolo_goa_jepang (accessed Dec. 02, 2024).

W. Rahardjo, Sukandarrumidi, and H. M. Rosidi, “Peta Geologi Lembar Yogyakarta, Jawa,” Pusat Survey Geologi, Badan Geologi, Bandung, 2012. [Online]. Available: https://geologi.esdm.go.id/geomap/pages/preview/peta-geologi-lembar-kebumen-jawa

W. Rahardjo, Sukandarrumidi, and H. M. Rosidi, “Peta Geologi Lembar Yogyakarta, Jawa,” Bandung, 1977.

S. Husein, I. Sudarno, S. Pramumijoyo, and D. Karnawati, “Paleostress Analysis to Interpret the Landslide Mechanism: A Case Study in Parangtritis, Yogyakarta,” J. Appl. Geol., vol. 2, no. 2, pp. 104–109, 2010, doi: 10.22146/jag.7251.

K. Triana and K. Hermawan, “Slope Mass Rating-Based Analysis to Assess Rockfall Hazard on Yogyakarta Southern Mountain, Indonesia,” Geoenvironmental Disasters, vol. 7, no. 24, pp. 1–17, 2020, doi: 10.1186/s40677-020-00164-w.

A. N. Rakhman, Z. Zakaria, D. Muslim, I. Haryanto, and S. Mulyaningsih, “Modification of Rock Mass Classification in The Rock Slope Platy Jointed Andesite at Seloharjo Area,” Int. J. GEOMATE, vol. 16, no. 53, pp. 163–170, 2019, doi: 10.21660/2018.53.32848.

A. N. Rakhman, “Determinasi dan Penerapan Rock Mass Rating untuk Penilaian Stabilitas Lereng Andesit di Seloharjo, Bantul,” Jnanaloka, vol. 5, no. 1, pp. 21–29, 2024, doi: 10.36802/jnanaloka.2024.v5-no01-21-29.

A. N. Rakhman and N. W. A. A. T. Heriyadi, “Pengaruh Diskontinuitas Massa Batuan Volkanik terhadap Stabilitas Lereng di Daerah Jelapan dan Sekitarnya, Kecamatan Pundong, Kabupaten Bantul, Daerah Istimewa Yogyakarta,” J. Teknol. Technoscientia, vol. 10, no. 1, pp. 71–77, 2017, doi: 10.34151/technoscientia.v10i1.85.

N. W. A. A. T. Heriyadi and D. Tania, “Analisis Kekuatan Massa Batuan Andesit Menggunakan Kaidah Kriteria Keruntuhan Hoek-Brown untuk Mengetahui Nilai Faktor Keamanan Lereng pada Daerah Seloharjo, Kecamatan Pundong, Kabupaten Bantul, DIY,” J. Teknol. Technoscientia, vol. 11, no. 1, pp. 11–20, 2018, doi: 10.34151/technoscientia.v11i1.110.

Y. Li, Handbook of Geotechnical Testing: Basic Theory, Procedures and Comparison of Standards. Boca Raton: CRC Press, 2019. doi: 10.1201/9780429323744.

Z. T. Bieniawski, Engineering Rock Mass Classifications. New York: John Wiley & Sons, 1989.

D. G. Price, M. H. De Freitas, H. R. G. K. Hack, I. E. Higginbottom, J. L. Knill, and M. Maurenbrecher, Engineering Geology; Principles and Practice. Berlin, Heidelberg: Springer-Verlag, 2009. doi: I0.1007/978-3-540-68626-2.

L. Zhang, “Determination and Applications of Rock Quality Designation (RQD),” J. Rock Mech. Geotech. Eng., vol. 8, pp. 389–397, 2016, doi: 10.1016/j.jrmge.2015.11.008.

D. C. Wyllie, Rock Slope Engineering: Civil Applications, 5th ed. Boca Raton: CRC Press, 2018.

A. Gudmundsson, Rock Fractures in Geological Processes. Cambridge: Cambridge University Press, 2011. [Online]. Available: https://www.cambridge.org/core/books/rock-fractures-in-geological-processes/9AF914CCBBE492119EDA10203E90ACA2

D. M. Ragan, Structural Geology: An Introduction to Geometrical Techniques, 4th ed. Cambridge: Cambridge University Press, 2009. [Online]. Available: http://www.cambridge.org/9780521897587

H. Fossen, Structural Geology, 1st ed. Cambridge: Cambridge University Press, 2010. doi: 10.1017/CBO9780511777806.

H. Sonmez, M. Ercanoglu, and G. Dagdelenler, “A Novel Approach to Structural Anisotropy Classification for Jointed Rock Masses Using Theoretical Rock Quality Designation Formulation Adjusted to Joint Spacing,” J. Rock Mech. Geotech. Eng., vol. 14, no. 2, pp. 329–345, 2022, doi: 10.1016/j.jrmge.2021.08.009.

A. Palmstrom, “Measurements of and Correlations between Block Size and Rock Quality Designation (RQD),” Tunnels Undergr. Sp. Technol., vol. 20, no. 4, pp. 362–377, 2005, doi: 10.1016/j.tust.2005.01.005.

Q. Chen and T. Yin, “Should the Use of Rock Quality Designation Be Discontinued in the Rock Mass Rating System?,” Rock Mech. Rock Eng., vol. 52, pp. 1075–1094, 2019, doi: 10.1007/s00603-018-1607-x.

N. Barton, “Some New Q-value Correlations to Assist Site Characteristics and Tunnel Design,” Int. J. Rock Mech. Min. Sci., vol. 39, no. 2, pp. 185–216, 2002, doi: 10.1016/S1365-1609(02)00011-4.

A. Soufi, L. Bahi, L. Ouadif, and J. E. Kissai, “Correlation between Rock Mass Rating, Q-System and Rock Mass Index Based On Field Data,” in 2nd International Congress on Materials & Structural Stability (CMSS-2017), Les Ulis: EDP Sciences - Web of Conferences, 2018, pp. 1–7. doi: 10.1051/matecconf/201814902030.

Mundar, “Rock Quality Designation, RQD,” Steemit, 2018. https://steemit.com/steemit/@mundari/rock-quality-designation-rqd (accessed Apr. 07, 2024).

C. Edelbro, “Evaluation of Rock Mass Strength Criteria,” Luleå University of Technology, 2004. [Online]. Available: http://www.diva-portal.org/smash/record.jsf?pid=diva2%3A990018&dswid=3975

D. C. Wyllie and C. W. Mah, Rock Slope Engineering: Civil and Mining, 4th ed. New York: Spon Press, 2004.

Rocscience, “Dips User Guide: Tutorials Overview,” Rocscience Inc., 2024. https://www.rocscience.com/help/dips/tutorials (accessed Mar. 20, 2024).

D. U. Deere and D. W. Deere, “The Rock Quality Designation (RQD) Index in Practice,” in Rock Classification System for Engineering Purpose, L. Kirkaldie, Ed., Philadelphia: American Society for Testing and Materials, 1988, pp. 91–101. doi: 10.1520/STP48465S.

C. Lucian and E. M. Wangwe, “The Usefulness of Rock Quality Designation (RQD) in Determining Strength of the Rock,” Int. Ref. J. Eng. Sci., vol. 2, no. 9, pp. 36–40, 2013, doi: 10.183X/F02093640.

S. Zhang et al., “Stability Analysis of Rock Wedge Slide Subjected to Groundwater Dynamic Evolution,” Eng. Geol., vol. 270, p. 105528, 2020, doi: https://doi.org/10.1016/j.enggeo.2020.105528.

B. Singh and R. K. Goel, Engineering Rock Mass Classification: Tunneling, Foundations, and Landslides, 1st ed. Waltham: Butterworth-Heinemann, 2011. [Online]. Available: https://www.sciencedirect.com/book/9780123858788/engineering-rock-mass-classification

R. E. Goodman and D. S. Kieffer, “Behavior of Rock in Slopes,” J. Geotech. Geoenvironmental Eng., vol. 126, no. 8, pp. 675–684, 2000, doi: 10.1061/(ASCE)1090-0241(2000)126:8(675).

M. Al Mandalawi, G. You, K. Dowling, and P. Dahlhaus, “Kinematic Assessment of Slopes at Handlebar Hill Open Cut Mine, Mt. Isa, Queensland, Australia,” Int. J. GEOMATE, vol. 10, no. 19, pp. 1575–1583, 2016, [Online]. Available: https://geomatejournal.com/geomate/article/view/1986

M. Romana, “New Adjustment Ratings for Application of Bieniawski Classification to Slopes,” in Proceedings of the International Symposium on the Role of Rock Mechanics in Excavations for Mining and Civil Works, Zacatecas, 1985, pp. 49–53.

M. Romana, J. B. Serón, and E. Montalar, “SMR Geomechanics Classification: Application, Experience and Validation,” in 10th congress of the International Society for Rock Mechanics (ISRM) Proceedings: Technology Roadmap for Rock Mechanics, Johannesburg: South African Institut of Mining and Metallurgy, 2003, pp. 1–4.

M. Romana, R. Tomás, and J. B. Serón, “Slope Mass Rating (SMR) Geomechanics Classification: Thirty Years Review,” in 13th Congress of The International Society for Rock Mechanics (ISRM) Proceedings: International Congress on Rock Mechanics, Quebec: International Society for Rock Mechanics, 2015, p. 10.